|
The Eames Lounge Chair and ottoman are furnishings made of molded plywood and leather, designed by Charles and Ray Eames for the Herman Miller furniture company. They are officially titled Eames Lounge (670) and Ottoman (671) and were released in 1956 after years of development by designers. It was the first chair that the Eameses designed for a high-end market. Examples of these furnishings are part of the permanent collection of New York's Museum of Modern Art. ==Design== Charles and Ray Eames aimed to develop furniture that could be mass-produced and affordable, with the exception of the Eames Lounge Chair. This luxury item was inspired by the traditional English Club Chair. The Eames Lounge Chair has become iconic with Modern style design, although when it was first made, Ray Eames remarked in a letter to Charles that the chair looked "comfortable and un-designy". Charles's vision was for a chair with "the warm, receptive look of a well-used first baseman's mitt." The chair is composed of three curved plywood shells: the headrest, the backrest and the seat. In early production, beginning in 1956 and running through the very early 1990s, the shells were made up of five thin layers of plywood which were covered by a veneer of Brazilian rosewood veneer. The use of Brazilian rosewood was discontinued in the early 1990s, and current production since then consists of seven layers of plywood covered by finishing veneers of cherry, walnut, Palisander rosewood (a sustainably grown wood with similar grain patterns to the original Brazilian versions), and other finishes. The layers are glued together and shaped under heat and pressure. Earlier models are differentiated from newer models by the sets of rubber spacers between the aluminum spines and the wood panels first used in the earliest production models (and then hard plastic washers used in later versions) early first series versions of the chair used three screws to secure the armrests, second series models used two, the domes of silence (glides/feet) on the chair base had thinner screws originally (1950's era) attaching them to the aluminium base, these are not compatible with later chairs. In the earlier models, the zipper around the cushions may have been brown or black as well, and in newer models the zippers are black. The shells and the seat cushions are essentially the same shape, and composed of two curved forms interlocking to form a solid mass. The chair back and headrest are identical in proportion, as are the seat and the ottoman. Early ottomans had removable rubber slide on feet with metal glides. Early labels are oblong foil type. The Eameses constantly made use of new materials. The pair's first plywood chair—the Eames Lounge Chair Wood (LCW)—made use of a heavy rubber washer glued to the backrest of the chair and screwed to the lumbar support. These washers, which have come to be called 'shock mounts', allow the backrest to flex slightly. This technology was brought back in the 670 Lounge chair. The backrest and headrest are screwed together by a pair of aluminum supports. This unit is suspended on the seat via two connection points in the armrests. The armrests are screwed to shock mounts which are connected only via glue to the interior of the backrest shell, allowing the backrest and headrest to flex when the chair is in use. This is part of the chair's unusual design, as well as its weakest link. The shock mounts have been known to tear free causing catastrophic collapse and damage. Other creative uses of materials include the seat cushions - which eschew standard stapled or nailed upholstery. Instead, the cushions are sewn with a zipper around the outer edge that connects them to a stiff plastic backing. The backing affixes to the plywood shells with a series of hidden clips and rings. This design, along with the hidden shock mounts in the armrest allow the outside veneer of the chair to be unmarred by screws or bolts. The chair has a low seat which is permanently fixed at a recline. The seat of the chair swivels on a cast aluminum base, with glides that are threaded so that the chair may remain level. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Eames Lounge Chair」の詳細全文を読む スポンサード リンク
|